Clothes rack for bedroom can provide a way for you to organize clothes whenever you need it most. They can be used in a utility room to hang clothes that require air drying or to show clothes for a garage sale. Homemade clothing racks can easily be made with a few items, usually found in homes for minimal costs. These clothes racks can easily be separated by portability. Extend a 72 inch adjustable tension shower rod to its full length. If working with limited space, you can change the length of the shower rod to shorter. Cut 2×4’s to even 48 cm pieces using a skill saw. Cut a 3 inch block from the top of the 2×4 using a stick saw. This will serve as two sides positions, the adjustable shower rods will rest in. Cut 2 in 4×4’s to 1 foot in length using a skill saw. Use a stick saw to cut a 2 inch block from each 4×4.
Ideas for make clothes rack for bedroom, place 2×4’s the newly created seats in 4×4’s and customize them so the ends are flush. Drill a 3/8 inch hole with a 4 inch long bit through the middle of one of the sides of each 4×4 and makes sure it passes through 2×4. It should then leave the other side of the 4×4’s. You must end up with holes that make up through both pieces of wood. Insert a straight bolt of your choice, such as a brace bolt, into the holes of both 4×4’s. Apply a flat slice and wing nut to the bolt when it has completely passed both pieces of wood. The bolt should be more than 4 inches in length to ensure that it securely secures the tree.
Cut the two 2×4’s to 3 feet in length with a skill saw. Screw them into the bottom of 4×4 with 2 or 3 inch wood screws for each piece of 4×4. These should be perpendicular to the shower rod and act as a base for the rack, which will prevent it from shaking. Paint wood pieces of clothes rack for bedroom with your choice of colored paint, wood protection, or polyurethane. This will make the wooden part of the rack more decorative. Put the shower rod into the holes.